View Full Version : questions about aqua C-EV series 120
BBain
12/11/2006, 06:16 PM
I just picked this skimmer up locally. In the instructions it says to run a mag 5. My question is where and how do i attach it and run it? Silly question i know but i cant figure this out! Pics would help out greatly!
Thanks in advance!!
Waxxiemann
12/11/2006, 06:22 PM
connect the pump to the black barbed elbow that is on the top of the black (box) body of the skimmer. Use a barbed fitting on the top of the pump.
HTH
BBain
12/11/2006, 06:35 PM
ok. Great! now another question...What about the grey 90 deg with the valve? what about the 1" in the middle with the valve nozzle??
Thanks for the reply! I appreciate it!!
evilsike
12/11/2006, 09:50 PM
http://www.proteinskimmer.com/EV120.pdf
this is the AquaC EV 120 manual. hope this helps
Craig Lambert
12/11/2006, 10:01 PM
http://reefcentral.com/gallery/data/500/18662Sump_Cleaning_Day___yuk_-med.jpg
This is an EV-180 which is slightly larger and uses a Mag 7. The plastic hose wrapped in black tape runs from the mag 7 pump in the sump to the spray injector. (Use plastic hose clamps to secure the already tight fit). The clear plastic tube is just an overflow line to a 1 gallon jug.
BBain
12/12/2006, 02:49 AM
That was awesome! Thanks guys!! Evilsike, my manual doesnt have that in it?? weird! Craig, thanks for the pic, just what i needed! Thanks again!!
B
lakee911
12/12/2006, 11:43 AM
Hi Craig,
Does that plastic hose wrapped in black tape keep algae from growing inside? Is it just electrical tape? Does the tape contact the water? My hose is good and brown--all slimed/gunked up I'd imagine.
Thanks,
Jason
Craig Lambert
12/12/2006, 12:01 PM
Yes. I wrapped it with electrical tape above the water line. Keeps algae from growing in the line.
vBulletin® v3.8.4, Copyright ©2000-2024, Jelsoft Enterprises Ltd.