Apex reset to factory settings?
I started program the apex through the display becasue I couldnt get it to work on my comuter. Now I got it to work with the computer but most of my programing is gone. I would like to reset it to the way it came out of the box, can I do that?
|
Using the display menus...
System->Init memory->All |
Thats it!! awesome, thank you...I couldnt find it anywhere
|
one more question
Im tring to program ramp up & down for my meanwell drivers and keep getting this error message \\ Error: Expected ON or OFF OR PFx //Error: line 3 - If Time 13:00 to 14:00 Then RampUp \\ Error: Expected ON or OFF OR PFx //Error: line 5 - If Time 19:00 to 20:00 Then RampDown This is what I typed: Fallback on Set off If Time 13:00 to 14:00 Then RampUp If Time 14:00 to 19:00 Then ON If Time 19:00 to 20:00 Then RampDown If Temp > 82.0 Then OFF Min Time 030:00 Then OFF |
In a statement like If Time 13:00 to 14:00 Then RampUp which references a profile, there must be an existing profile by that name.
Define the desired profile(s) first (including renaming the default PFx profile name) , then program the VarSpd port(s) to use the profile(s). |
Thats it!! awesome, thank you yet again
|
All times are GMT -6. The time now is 02:00 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by
Advanced User Tagging v3.3.0 (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.