14 Gallon XXL, Extra, Extra, Long
Well it looks like I'm doing another Nano tank, but this time for a buddy and he's planning on FOWLR. The dimesions are 46"x8"x12.5" built out of 1/2" acrylic so it's a nano beast! Each end has a 1/4" divider which will be used for built in filtration leaving the display area 36" wide. Total display area calculated with acrylic loss leave 12.5 and assuming 5" water height on each overflow give another 1.5 gallons for a total of 14 gallons. Here are some drawings (not to scale sorry) to try to make sense of what I've written but let me know if you have any questions.
Multi View http://i6.photobucket.com/albums/y24...oMultiView.jpg Wire Frame http://i6.photobucket.com/albums/y24...oWireFrame.jpg Rendered Wire Frame http://i6.photobucket.com/albums/y24...WireRender.jpg I'm calling it a 14 gallon XXL (extra extra long). The returns on each overflow box will be a maxijet, one along the front, and one along the back. Each box will incorporate filter pads to run mechanical and chemical filtration (carbon/phosban) with biological handled with live rock in the display. I'll take some actual pics when were done water testing it. :D |
FOWLR? How many fish are you guys planning on?
|
My buddy is looking at either a Flame or Coral Beauty, with a firefish and a couple clown gobies... Just enough to tell it's a salt tank.
|
That should be really cool. Just keep the fishes small. LOL
|
No prob Todd. :)
Here's some pics of it after the water test, sorry it's still a little dirty, but should clean up just fine. :) I think I'll end up removing every other tooth on the overflow screen to allow me to increase pump size down the road. It's just enough for a MJ400 right now. http://i6.photobucket.com/albums/y24...5/DSCN2074.jpg http://i6.photobucket.com/albums/y24...5/DSCN2079.jpg http://i6.photobucket.com/albums/y24...5/DSCN2078.jpg http://i6.photobucket.com/albums/y24...5/DSCN2077.jpg http://i6.photobucket.com/albums/y24...5/DSCN2075.jpg w/ Flash http://i6.photobucket.com/albums/y24...5/DSCN2072.jpg |
Not bad at all dude...would be nice for seahorses or a shark. ;)
|
Thanks bro! I thought it would be a sweet seahorse tank too, but the guy I built it for is a newb so we'll leave the ponies to the pro's. ;) As for sharks, I think they would be overwelmed with the all the room so I'll probably steer clear of them too. LOL!
|
Now your wondering why you didnt build your own tank!
|
Awesome job Eric, that would look sweet on a bookshelf or fireplace mantel. It reminds me of another thread I saw where a guy made a "mini raceway" frag growout setup of a couple 48x6x6 acrylic tanks that were wall mounted one above the other and gravity fed from the top one down (although he had a lot of trouble with bowing, which I doubt you will because of the bracing and acrylic thickness).
So each overflow compartment is independent? I assume the Maxijets returns will poke out those holes near the bottom? What are you going to do for lighting? I bet with a 48" T5 or even PC you could get some good SPS growth if you wanted to go that route. Larry |
Quote:
Quote:
|
Got the tank setup yesterday and getting ready to build the canopy tomrrow. Now just the waiting game for the tank to cycle. :) Used rock that's been cooking in my basement for the last 9 months so I'm curious to see if he even get's a diatom bloom.
Anyway, here's the pics... http://i6.photobucket.com/albums/y24...5/DSCN2081.jpg http://i6.photobucket.com/albums/y24...5/DSCN2082.jpg http://i6.photobucket.com/albums/y24...5/DSCN2083.jpg http://i6.photobucket.com/albums/y24...5/DSCN2084.jpg Filter box chamber on the left http://i6.photobucket.com/albums/y24...5/DSCN2085.jpg http://i6.photobucket.com/albums/y24...5/DSCN2086.jpg http://i6.photobucket.com/albums/y24...5/DSCN2087.jpg The box on the right will be for the protein skimmer... |
Looks cool. You should get a couple rectangles of black acrylic that could sit in front of the two end compartments, maybe use velcro or something so they're removable.
|
Thanks, the covers are already there... They sit on the inside and are removable to see the chambers like in the photos. The first couple pics show the panels in place and I'm planning an additional piece to cover the back wall. :)
|
I wouldnt mind doing dishes so much if I had one of those! Nice work.
One question though.... Now he'll have two places that need to be topped off, right? |
Actually, what I did was install a 600 on the filter side to keep the water level low and a 400 on the other side to keep it completely filled. Top off on one side, protein skim on the other. :) Skimmer, canopy and new base w/ power management are still to come! :D
|
Anyone think filling the right side with Chaeto instead would be more beneficial than adding a skimmer?
|
Well, we got the canopy finished (other than the doors) and we can't build the base until the power management gets in. I'll take some new pics soon...
|
Okay guy's, here some pics of the canopy and the doors which still need to be primed, painted and installed...
http://i6.photobucket.com/albums/y24...5/DSCN2088.jpg http://i6.photobucket.com/albums/y24...5/DSCN2089.jpg http://i6.photobucket.com/albums/y24...5/DSCN2092.jpg http://i6.photobucket.com/albums/y24...5/DSCN2093.jpg http://i6.photobucket.com/albums/y24...5/DSCN2094.jpg http://i6.photobucket.com/albums/y24...5/DSCN2095.jpg http://i6.photobucket.com/albums/y24...5/DSCN2096.jpg http://i6.photobucket.com/albums/y24...5/DSCN2097.jpg http://i6.photobucket.com/albums/y24...5/DSCN2098.jpg |
I'll get some more pics as things progress, my buddy works crazy and varying hours so finding time to get together really is a challenge... I primed and painted the doors last night, but realized we bought the wrong hinges so back to Lowes I go. The base won't get started until this weekend (most likely) as we won't have the PM until then.
So here my next question... If this were your tank and based on the current conditions, lighting (VHO), filtration etc... How would you stock this tank? Corals, fish, inverts etc... I want to get as many ideas as I can. Reef or FOWLR... |
maybe a community of shrimp gobies and their symbiotic shrimp? Like 1 high fin, 1 yasha haze, 1 randall's. For coral I would do all soft corals...all sorts of colorful leather corals.
|
Or you could go high end and do a pair of helfrichi firefish???
|
Thanks Eric! Gotta keep it on the cheap side (not my funds... :) ) I like the idea of goby/shrimp pairs, with some softies, maybe a few LPS for extra color. ;) I'll pass along the idea!
|
Okay, canopy is done, just waiting for the power management to get here so we can build the base. :) Here's some more pics...
BTW The background will be built with the base... W/ Flash http://i6.photobucket.com/albums/y24...5/DSCN2100.jpg http://i6.photobucket.com/albums/y24...5/DSCN2102.jpg W/out Flash http://i6.photobucket.com/albums/y24...5/DSCN2099.jpg http://i6.photobucket.com/albums/y24...5/DSCN2101.jpg http://i6.photobucket.com/albums/y24...5/DSCN2104.jpg Tank shots... Right http://i6.photobucket.com/albums/y24...5/DSCN2105.jpg Center http://i6.photobucket.com/albums/y24...5/DSCN2106.jpg Left http://i6.photobucket.com/albums/y24...5/DSCN2107.jpg |
That thing is bad!!! I think you guys should move it though. It looks kinda odd covering up that window. It's an awesome setup it deserves the living room!!! :)
|
Yeah, but where would it stop? Next a cabinet for the tank, then we'd drill it and build a custom sump. Then a return pump, killer skimmer, chiller, dosing pump, MH lighing, Closed loop, the list goes on. LOL!!!
|
All times are GMT -6. The time now is 09:37 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by
Advanced User Tagging v3.3.0 (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.