How to attach a power strip on the inside wall of a stand?
Are velcro brand fasteners a good choice or is there a better way to do it?
|
that would be fine - i use a couple short wood screws that will fit into the slots on the back of the strip
|
I use a couple of short pan head screws, sort of like billdogg suggested. It give me peace of mind knowing it's not going to fall off into my sump!
|
Lots of good velcro will work, but I would also suggest the screws, less chance of it falling.
Kim |
If you have the thickness in the wood on the stand I would definitely go with screws for peace of mind.
|
I would take it s tep further and NOT use the powerstrip... Build your own using high quality (commerical or hostpital grade) receptacles and PVC boxes.
|
Nail gun....
Just in case I better say I'm kidding so no one tries it haha. But really if you have a sump mounting your power strip in the stand above it is a pretty bad idea IMO. I also would not use velcro if there is a chance the strip will land in water or even just get wet if it falls.. |
Quote:
Thanks, |
All times are GMT -6. The time now is 03:13 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by
Advanced User Tagging v3.3.0 (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.