Double cone 200 for 1300L system
 

Hi all,

we have a new double cone 200 + RD3 on a new restarted (one month ago) tank for SPS, 1200 liters DT+ Sump 300 liters.

Any suggestions for best settings of this baby?

Sump Level, Watt and bubble/foam level?

Congrats! Sounds like a very nice system! I'd start it in around 8.5" of water. Pump speed between 28-32 watts and use the wedge pipe to get the line where bubbles turn to foam at about the white collar where the cup attaches to the body. Since you have a low load right now, you could go as deep as 9" in which case, you won't need to close the wedge pipe as much. Once the skimmer breaks in, find the sweet spot on the pump speed that makes for the most dense foam. Keep in mind that skimmers need dissolved organics to create good foam and because your load is going to be low for a while, any adjustments you make once it breaks in will likely change a bit as the load increases.

Thank You!

Really this tank isn't my own. My Reef Club made a marine aquascaping event at our LFS, and we suggested the BK as new skimmer. ;-)

I've a Supermarine 250 RD3 on my reef (750 lt, but very high stocked) and I'm very happy! It's a incredible machine.