Reef Central Online Community

Reef Central Online Community (http://www.reefcentral.com/forums/index.php)
-   Jose Dieck (http://www.reefcentral.com/forums/forumdisplay.php?f=609)
-   -   How to connect Gilmont flow meter? (http://www.reefcentral.com/forums/showthread.php?t=1734825)

lesd 11/05/2009 11:43 AM

How to connect Gilmont flow meter?
 
Jose,

Great article last month - I've been running a Calcium Reactor for a few years and still learned a ton from that article.

Since reading it I ordered one of the needle valves from US Plastics, which was a VERY worthwhile purchase. Made my problems regulating the effluent rate a thing of the past.

I also ordered and just received one of the Gilmont flow meters you recommended. Looking at it, there is no obvious way to get it connected to John Guest fittings. Do you have any recommendations for easy adapters to get this thing plumbed in-line with standard 1/4" tubing?

Thanks,
Les Douglas

jdieck 11/05/2009 12:47 PM

Quote:

Originally Posted by lesd (Post 15973807)
Jose,

Great article last month - I've been running a Calcium Reactor for a few years and still learned a ton from that article.

Since reading it I ordered one of the needle valves from US Plastics, which was a VERY worthwhile purchase. Made my problems regulating the effluent rate a thing of the past.

I also ordered and just received one of the Gilmont flow meters you recommended. Looking at it, there is no obvious way to get it connected to John Guest fittings. Do you have any recommendations for easy adapters to get this thing plumbed in-line with standard 1/4" tubing?

Thanks,
Les Douglas

Les:

I use two connectors at each end with a short pice of hose:

+ Use a short pice of flexible hose (1/2" ID) to connect the end of the glass meter, take the meter with you when looking for the hose as some fit tighter than others. You may need to extend the hose to insert partially beyond the white teflon ends of the meter and into the glass.
Insert the other end of the hose to...

+ Stem x Barb coupling. Mcmaster.com part No. 51055K231 3/8" stem x 1/2" barb. http://www.johnguest.com/gfx_series/PI25_D1.GIF

The smooth stem side inserts into the 3/8" side of a quick connect Reducing Coupling. Mcmaster.com part No. 51055K97 3/8" x 1/4".
http://www.johnguest.com/gfx_series/PI20_D1.GIF

The 1/4" dia side connects to standard 1/4" tubing.

lesd 11/06/2009 10:00 AM

Thanks Jose!

jdieck 11/06/2009 10:57 AM

Quote:

Originally Posted by lesd (Post 15978729)
Thanks Jose!

Glad to be helpful, let me know if you need additional help.

jdieck 12/03/2015 06:12 PM

Quote:

Originally Posted by hyaxasa (Post 24162705)
Do you have any recommendations for easy adapters to get this thing plumbed in-line with standard 1/4" tubing?
บาคาร่าออนไลน์

Use a short piece of flex hose into John Guest connector. See the picture on this link.
http://reef.diesyst.com/crarticle/crarticle.htm


All times are GMT -6. The time now is 09:02 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging v3.3.0 (Pro) - vBulletin Mods & Addons Copyright © 2022 DragonByte Technologies Ltd.