Skimmate Locker & Profilux
 

I recently bought the Davy Jones’ Skimmate Locker (love that thing) and I am having a little trouble configuring it to work with my Profilux aquarium controller. Is there anybody out there using the same setup that is willing to share how they configured theirs?


Thank you in advance for your help.

is there an instruction on how to use the new skimmate locker with profilux controller?

Hi Quan,

YOu can use the same programming for the locker as you would an ATO. The logic is identical. You can email us if you need help with this.

i'm able to do this but the maximum on-time is capped at 8hrs. Is there a way to set it to 24hrs so I don't have to reset it every day?

I have asked GHL USA to stop by here and address the programming issue.

Here's the instruction from Vinny:
- Set the OPERATION MODE to Leakage Detection
- Max on-time can be left as 1 min as it does not dictate when the assigned outlet will turn back on or shut off
- Select correct sensor number
- INVERTED...No
- Assign socket to FILL WATER and select the control circuit number you used to create this Leakage function.
- Save settings

Once the sensor has been tripped, it will shut down the skimmer pump until the alarm has been deactivated. It will not turn back on after the Max On-time has elapsed.

Thanks for the update Quan and thanks for the help GHL!