CT 400 Build
I'll start this in the same way that I did my last build thread - it's going to be a slow gestation. Further, I'm going to have to find a photobucket alternative because it's driving me nuts.
About to order a 400, 8' long, 3' wide, 30" tall. My first acrylic . Old 265 is full, both for fish and for corals. Tank will take 10-12 weeks, so time over the Summer to build a new stand, work out what additional floor reinforcements will be required, and collect any incremental kit necessary. Most of what I have will suffice, though the vortech MP40 pumps will likely not work on 1" thick walls. Will need a better overflow, probably 36" modular marine model. Will need another 100 lbs of sand, give or take. Lots of plumbing and containers for holding livestock and water during the swap. Finally, 4-5 strong lads. To be continued ..... |
Following
Sent from my SM-G935V using Tapatalk |
Whopping 400. Can't wait to see it.
Sent from my Moto G (4) using Tapatalk |
Looking forward to it. I am a big fan of Flickr if you are using a computer to compose your updates. Their mobile app is good for uploading/organizing but doesn't provide a handy BB code like their desktop interface does. That said, you can chose a size for your BB code photo on desktop which I find handy. Unlike photobucket I've never had it slow to a crawl, not work or take forever for photos uploaded from mobile to show on the web interface on my computer.
Downside is that their generated BB code includes a link to the Flickr page for your photo and your flickr user. |
Since my system display is on a floor above the mechanicals, I'm going to take advantage of gravity as much as possible and eliminate a pump or two. Drain siphon already feeds the ATS, but I'm going to use it feed the separate refugium and frag tank as well.
Also going for lots of swimming room, so corals will not be closer than 12 inches to the front. Will also allow me to use the lights I have for the rear 24" and really limit the light that hits the front. Last time I had a 36" wide tank I did this and got almost no algae on the front. Planning a wooden 'skirt' around the tank so that any algae that does build up next to the sand can be ignored. |
i too am building a 300-400g tank but i am on a bit longer of a time line as i am starting the process of building a new fish room by building a new house around it....
I just found some land am about to pull the trigger on the house process but i will follow your thread as we are doing the same process. Do you know what brand or who will build your tank? do you have any new equipment spec'ed yet? |
Who is building the tank ?i also went acrylic on my new 400 ..its my first acrylic too.. are u nervous about scratching it ?...i am.alitte
|
Quote:
|
Quote:
|
What's ur plans on cleaning the glass/acrylic
|
I'll be shading the front pane, so expecting low algae growth. Been advised to use acrylic intended mag float with magic eraser. Dont leave magnet cleaner in the tank. Also as noted I'm going to make a skirt that will cover the sand so I can leave a strip of uncleared front thus avoiding picking up any sand. Beyond that just being very careful.
Check out my large acrylic tank thread in the reef discussion forum. |
1 Attachment(s)
This is the most recent picture of my 265 - quite full as you can see. With some trimming and moving 'damage' I figure I can get it all into the 400. Going to build the new stand with the same plywood 'microlams' as before - worked really well and was incredibly rigid. Tank sits over a weight bearing foundation wall, so will add an additional jack post, but that's about it.
|
Quote:
Also what's your backup plan when your anemones don't stay on your island? :D |
No, no. A 400 is never going to hold that lot in place. I'd go bigger. :wink:
Dave.M |
Quote:
|
Im in the market for a 400 tank, been researching glass however, I have never had an acrylic tank and have always been scared.. Your 265 is glass right?
|
What is your plan with the 265 when you setup the new tank?
|
I have been thinking about a bigger tank for a while and have debated glass versus acrylic. I did explore options and builders for both. I do worry about scratching with acrylic, but experienced users have assured me that it is quite manageable. The weight of the 400 gallon acrylic tank is about 500 pounds empty, the same sized glass tank is about 1,300. Cost (once freight is factored in) is about the same.
I haven't given a great deal of thought to the fate of the 265 (a glass tank). It's 4 years old, so plenty of life left in it and it ought to be saleable; though large used tanks are hard to move at anything more than pennies on the dollar. I have plenty of storage space in the garage, so probably I will try to sell it at a fair price; failing that I'll just store it until certain I won't reuse it for something else; or maybe donate it to a local club. |
Quote:
|
You should just setup the 265 as well, you know you will need it too. A lot more fish and corals to be had, LOL!!!!
|
Quote:
nice build! can't wait to see the end result. following for sure. |
seems like most of the people i have talked recommended glass tanks, what was the reason for going acrylic? would love to hear everyones opinion and why as i am in the hunt for a 300-400 tank
|
Quote:
|
I think the reason why public places do acrylic is because it is something that is fixable if you get some "vandal", where as glass not so much. I know one of the local aquariums it isn't a matter of an acrylic box welded at the seams, it's a fiberglass (or concrete) aquarium with an acrylic viewing pane held against a silicone gasket. So it's not about the leak prevention of welding vs. silicone adhesion to glass.
I have gone back and forth between acrylic and glass myself, and the scratches are something I can deal with, however what I can't deal with is all the extra elbow grease required to keep acrylic looking good. Now you can either be very vigilant with your daily cleaning so that it never becomes a problem (small amount of effort, lots of time) or you could attack it when you get the chance which if it's something like coraline algae or that harder brown algae then you have to put a tremendous amount of effort into it. My experience with glass, you take a razor blade, and within 10-15 minutes (obviously depends upon the tank size) the pane looks brand new and crystal clear (yup even on non-starphire!). And ultimately the clarity is going to depend upon how clean you keep it, not what the material is made out of. that said I've seen beautiful acrylic tanks as I have seen glass tanks. |
Some thoughts on equipment:
1. It's quite likely that my two MP40 pumps aren't going to work with 1" thick walls, so I have acquired a second MP60. I will certainly attempt to get the 40s to work but if they don't, dual 60s should suffice. 2. I'm still going to use the closed loop, though with larger piping so I can get more flow out of my Vectra pump. 3. I use a few of those Aquamag magnetic rock shelves, and they're problematic with 1" walls. Have some much more powerful external magnets so will try those. 4. I run a panworld 200 to feed both the 265 and my 120 refugium. I'm going to feed the refugium from the overflow drain, so the entire flow from the 200 should be enough for the new tank. 5. Not planning any new lights for now considering I will be putting all corals in the rear 24". |
All times are GMT -6. The time now is 05:54 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by
Advanced User Tagging v3.3.0 (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.