Clowning_Around's Tank Journal thread.
 

So I've begun the journey of entering the fish aquariums again, specifically saltwater. I've recently purchased a 75 gallon tank and have just completed my do stand posted here:

http://www.reefcentral.com/forums/sh....php?t=2638512

I've started some plumbing last night as well as a diy glass 20g sump tank yesterday that needs to cure for 72 hrs. I'll post some on that once I sort the photos. In the interim below is a photo of it's current state:

I've also begun planning my complete livestock list which I'll post in follow-up once I retrieve it from my notes.https://uploads.tapatalk-cdn.com/201...0a29a06575.jpg

Sent from my SM-G930P using Tapatalk

looks good!

That stand looks great!

Thanks!

Sent from my SM-G930P using Tapatalk

My diy sump is complete and passed my chamber leak tests [emoji3] https://uploads.tapatalk-cdn.com/201...37c4e020a8.jpghttps://uploads.tapatalk-cdn.com/201...5486ec50df.jpg

Sent from my SM-G930P using Tapatalk

I used a 20gallon long from PetSmart, actually I used two of them. They had a 30%off your pick special so the tanks where a little over 20 a piece. I bought the second to harvest the glass to make my baffles which was alot less than what the glass shops around town wanted. Be warned though, if you borrow my idea it's a bit of extra effort.

Sent from my SM-G930P using Tapatalk

I've been busy. I've made my own overflow with a weir PVC pipe. That was a fun little challenge to cut but I think it turned out great.https://uploads.tapatalk-cdn.com/201...af6d77ed06.jpghttps://uploads.tapatalk-cdn.com/201...6f433f07d5.jpghttps://uploads.tapatalk-cdn.com/201...6dd9328c94.jpg

Sent from my SM-G930P using Tapatalk

Here's a few more pics of the progress inside my stand and my external plumbing complete, minus of course my loc-line sitting in the tank obviously :). I also added a mid rail support member for peace of mind for any outward load/ bowing forces and torsion resistance. Next up is cable management and my DIY skimmer.https://uploads.tapatalk-cdn.com/201...b5297b69ad.jpghttps://uploads.tapatalk-cdn.com/201...b0d26e33fd.jpghttps://uploads.tapatalk-cdn.com/201...2e42ebef91.jpghttps://uploads.tapatalk-cdn.com/201...628c9eef1d.jpg

Sent from my SM-G930P using Tapatalk

Nice work on that overflow. Looks legit!

GFCI check, Leveling done also! Make leveling shims out of 1/8in alum plates and adhered them together and with the leg bottoms as needed. On a side note I decided against my diy skimmer and opted to order one it should be in next week. So now I get to start washing my pool filter sand and faux coral decor for my FO tank. I might even fill'er tonight and just start circulating the water. This is fun!https://uploads.tapatalk-cdn.com/201...a0b45592b0.jpghttps://uploads.tapatalk-cdn.com/201...0c1f453b47.jpghttps://uploads.tapatalk-cdn.com/201...b46b6fde08.jpghttps://uploads.tapatalk-cdn.com/201...b5e7e68486.jpg

Sent from my SM-G930P using Tapatalk

Ewww who knew pool filter sand could be so sorry, bit then it gets better...

I used a 5gal poly paint strainer which seemed to help.https://uploads.tapatalk-cdn.com/201...d86e079b86.jpghttps://uploads.tapatalk-cdn.com/201...3a44180312.jpghttps://uploads.tapatalk-cdn.com/201...c214ef3144.jpg

Sent from my SM-G930P using Tapatalk

Yay, water finally!https://uploads.tapatalk-cdn.com/201...1f73f57c0f.jpg

Sent from my SM-G930P using Tapatalk

Up and running, time to add the goodies to get things goinghttps://uploads.tapatalk-cdn.com/201...866b5fa543.jpghttps://uploads.tapatalk-cdn.com/201...12b9502804.jpg

Sent from my SM-G930P using Tapatalk

Lol it looks like it just snowed in there.https://uploads.tapatalk-cdn.com/201...3ab3b8ee3c.jpghttps://uploads.tapatalk-cdn.com/201...225e8de5b8.jpghttps://uploads.tapatalk-cdn.com/201...02976ee942.jpg

Sent from my SM-G930P using Tapatalk

I'll swap the bulb to n actinic when I get some swimmers in there.

Sent from my SM-G930P using Tapatalk

Decided to redo my sump. Was able to get a good deal on a used 40g breeder tank localy. https://uploads.tapatalk-cdn.com/201...7c484f2542.jpghttps://uploads.tapatalk-cdn.com/201...f2c155cbd7.jpghttps://uploads.tapatalk-cdn.com/201...6ea21921ce.jpghttps://uploads.tapatalk-cdn.com/201...3566310d90.jpg

Sent from my SM-G930P using Tapatalk

I could be wrong but aren't those types of overflows notorious for failing? Nice build by the way.

Thankyou. I did the overflow without full due dilligence on my part. Its been up and running for 2 months now with no hickup and autorestarts like a champ. Still I dont have the warm and fuzzies about it escpecially long term once the inner slime builds as well as trapped gasses. So I am in the process of redoing my overflow as well, just been having to prioritize and await parts, etc. I will be doing a bean overflow with a full tank width weir.

Sent from my SM-G930P using Tapatalk

Oh I see your going to change the overflow. The sump looks good.

Great start.
You might want to give your drain/overflow a second thought.
Its going to flood your house soon or later. I would be very caution about it.
I would look into getting a reliable overflow box or have the tank drill.


Sent from my GT-I9192 using Tapatalk

Im actually drilling this weekend, i just picked up a temporary 100g tank so i can store my water while i replumb everything.

Sent from my SM-G930P using Tapatalk

No turning back now, 1 hole down, 2 to go

Sent from my SM-G930P using Tapatalk

Pics inprogresshttps://uploads.tapatalk-cdn.com/201...40d14582fa.jpghttps://uploads.tapatalk-cdn.com/201...7709121947.jpg

Sent from my SM-G930P using Tapatalk

Holes turned out good i thinkhttps://uploads.tapatalk-cdn.com/201...3458c3411a.jpg

Sent from my SM-G930P using Tapatalk

Looks good