Apex vs Vectra, any development?
Hi guys!
I recently bought a second hand Apex classic with lots of modules and I'm loving it, one of my favorite features is the "one click" feed modes. My return pump is currently a Jebao 8000, and since it does not keep head pressure in feed mode I'm about one inch from overflowing my sump in feed mode. A couple of days ago I got a great deal for a Vectra L1, having the VXM module I was thinking I was golden. I have since understod that this is not the case as they are not compatible with each other. :headwally: Anyway, it has been a couple of years since the controversy started and I wanted to ask if the have been any third party development to make the two units play nice together? Or is there some kind of hack? If not I'm guessing I just have to start my feed mode by pressing first the vectra controller for 3 seconds then set the apex in feed mode. |
Following to see feedbacks
|
Quote:
|
My Apex fusion “A” activates my Vectra feed mode. I hope this helps.
Paul http://www.reefcentral.com/forums/sh....php?t=2668843 |
Quote:
|
Quote:
Sent from my SM-G960U using Tapatalk |
Quote:
My solution requires you to have a battery backup. What you do is have the Vectra power supply plugged directly into a controllable outlet of the Apex. When feed mode is hit the outlet is turned off and the Vectra goes into battery backup, to where I programmed the flow to only hold the head pressure. |
Jimmy,
I thought of turning off an outlet and thus the pump using my apex, however, I was concerned the frequent offs and ons could damage the pump or controller Paul |
All times are GMT -6. The time now is 12:48 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by
Advanced User Tagging v3.3.0 (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.