Reef Central Online Community

Reef Central Online Community (http://www.reefcentral.com/forums/index.php)
-   The Reef Chemistry Forum (http://www.reefcentral.com/forums/forumdisplay.php?f=112)
-   -   Hanna low range tester help (http://www.reefcentral.com/forums/showthread.php?t=2669395)

fishkeeprian 03/01/2018 01:45 PM

Hanna low range tester help
 
Hello tested my water 3 times in a row and I got the following results 5ppb (0.015ppm), 0ppb & 2ppb (0.006ppm).

What's going on with my tests?

Should I switch my reactor off?

Thanks

Vinny Kreyling 03/01/2018 05:42 PM

Hobby test kits have a + - range, this should be in the instructions.
You are talking ppb, I don't think any kit we use is capable of these measurements.

outssider 03/01/2018 06:28 PM

I have used the hanna 736 for many years. It is pretty precise but it's not lab quality so don't expect the exact same reading 3 times in a row... it's just not going to happen!
If you test 3 times in a row and get -0- every time then you can bet you have very low phosphates/phosphorus, close to ZERO. If on the other hand you get the kind of numbers you got, you don't have -0- but very low, probably between 0-5ppb which is pretty precise for a $50 instrument.

Dan_P 03/01/2018 06:46 PM

Quote:

Originally Posted by fishkeeprian (Post 25377876)
Hello tested my water 3 times in a row and I got the following results 5ppb (0.015ppm), 0ppb & 2ppb (0.006ppm).

What's going on with my tests?

Should I switch my reactor off?

Thanks

Perfectly normal. I think Hanna describes the variation as +/- 5 ppb +/- 5% of the reading. Roughly speaking, a reading of 5 ppm could mean 0 or 10 ppb. Taking 3 readings is a smart thing to do. Take an average.

bertoni 03/01/2018 09:28 PM

I agree that the average should be more accurate than a single reading. Those levels are all very close, in hobbyist terms.

fishkeeprian 03/02/2018 01:00 AM

Quote:

Originally Posted by bertoni (Post 25378334)
I agree that the average should be more accurate than a single reading. Those levels are all very close, in hobbyist terms.

With the results I have should I now shut off my reactor?

I do still have a little hair algae and need to clean the glass every couple of days.

I had a reading of 105ppb (0.322ppm) about two weeks ago so it seems it has dropped a lot.

bertoni 03/03/2018 03:23 PM

I'd probably let the system be as is. At this point, watching the animals and the algae are all you can do. Test kits don't tend to be helpful down in this range.

fishkeeprian 03/03/2018 04:13 PM

Quote:

Originally Posted by bertoni (Post 25379745)
I'd probably let the system be as is. At this point, watching the animals and the algae are all you can do. Test kits don't tend to be helpful down in this range.

So turn the reActor off or leaving it running.

What phosphate reading should I am for in ppb?

bertoni 03/03/2018 04:18 PM

I'd leave the reactor running. As far as the reading in ppb, anything in the 0-10 range is close enough, given the accuracy in our test kits.

rjjr1963 03/06/2018 04:57 PM

Phosphate is not the algae boogie man many people seem to think. Phosphate is an essential part of the reef aquarium and reducing it to miniscule levels can cause more harm than good. I run my phosphate at .1 ppm with no algae problems and very happy coral.

RobZilla04 03/06/2018 05:12 PM

Quote:

Originally Posted by rjjr1963 (Post 25382404)
Phosphate is not the algae boogie man many people seem to think. Phosphate is an essential part of the reef aquarium and reducing it to miniscule levels can cause more harm than good. I run my phosphate at .1 ppm with no algae problems and very happy coral.

Do you dose carbon? Curious cause I'm at .1 Po4 and 15ish No3. If the minimum algae would go away I'd throw a party.


All times are GMT -6. The time now is 09:40 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging v3.3.0 (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.