thread: Fishdips 20L
View Single Post
Old 01/03/2018, 11:51 AM   #23
Registered Member
tundra1000's Avatar
Join Date: Feb 2008
Location: New Hampshire
Posts: 242
HOB surface skimming

One option you have is to create a small weir and put the intake for the HOB into it. I don't think I have any pictures but I had done this on a 20L a few years ago and it worked great. All I used was a 3" diameter section of acrylic I had, cut it to length so that it was about an inch below the top of the tank, stuck it in the corner and put the HOB intake in. It worked great. This also allows you to be very precise with your ATO as the evap shows up quick.

I can't recall the name but someone has a build thread with multiple anemone tanks made from 20 longs and they made up some internal weirs to create the same effect. I'll see if I can find and post a link.


"Those who believe it can't be done should not interrupt those doing it."

Current Tank Info: 54 Corner
tundra1000 is offline   Reply With Quote