Quote:
Originally Posted by Randy Holmes-Farley
OK, I just wanted to be sure you knew what you were getting into and what you'd have when you were done. Without temperature compensation, you'll have to warm up any calibration standards you use as well. I personally wouldn't want to use a conductivity meter that wasn't temperature compensated. Even 2 deg F is enough to change the readings a fair amount.
|
Good point, I will need to remember that.
Quote:
Originally Posted by Randy Holmes-Farley
I didn't see any prices on the site you linked. As you note, the SLD-1 is not suitably high in range.
|
$15, but you have to wire the money so unless you are buying several, the costs do not make sense.
Anyone know what probe they are using in these builds:
http://www.nano-reef.com/forums/inde...owtopic=180805
http://sites.google.com/site/richardorme1979/home