Quote:
Originally Posted by JarekS
So, how hard is to attach simple temp sensor to typhoon to monitor temperature on one heat sink ? I need a wat to see how hot it gets inside enclosed hood with stock fans running. I'd appreciate any help
|
Here's what I found for a single sensor.
And this is how I did 3 sensors. But note..
That red jumper should be connected to ground, not vcc.. buddy pointed that out to me just from the picture.
This post had the schematic for multiple sensors
http://www.reefcentral.com/forums/sh...&postcount=897
It was pretty easy actually. Just look at my script, and see where the temp stuff was added, and you can see what needs changing. I just did a simple c/p from another script out there
