Quote:
Originally Posted by slief
I think you have an address conflict. Disconnect the ALD from the Aquabus. Go into your module settings page from the classic dashboard and delete all ALD’s. This may solve your EB8 issue too. Then plug your ALD back in to the Aquabus. It should add your ALD without all the duplicates. Note that since the address is likely to change, programming associated with our ALD from your backup may need to be reprogrammed. If not, update the EB8 firmware as I mentioned above if you haven’t already done so.
|
Ok i unplugged the ALD and updated the EB8 firmware. IT WORKED IT WORKIED EB8 IS SOLID GREEN!!! Doing the 2nd EB8 now