Quote:
Originally Posted by madweazl
The panel was simple 3/8" plywood. I framed it in with 1"x2" on the back and left approx 5" open in the upper right corner so the wires could pass through. For the wires to pass under the relay box, I drilled 5/8" holes (could be made a bit smaller but some of my cables were fairly thick) and then just cut out the center. 5/8" grommets will fill fill the holes and keep it looking nice and clean. |
Sry, meant the box and receptacles for power?
__________________
-Ricardo
22g RBTA tank build:
http://www.reefcentral.com/forums/showthread.php?t=2578399
Current Tank Info: 22g Peninsula tank RBTA / Euphyllia / Clownfish
|