Quote:
Originally Posted by T Diddy
I was referring to the in-tank overflow...I guess 1.5 inch. Is it capped at the bottom?
|
T,
Oh, I see.
The HOB portion is 1 and 1/2 thru out.
My 'intank overflow' is a sealed unit.
However, it is 6 and 3/4 inch at the top, and tapers down to 4 inch ID at the bottom.
It is capped and sealed w/ PVC cement throughout.
This is mandatory for it to hold it's siphon in power outs.
For smaller applications, you could go smaller than my build.