Hello all. Been lurking for a long time - thanks for all the contributions along the way to this thread. I'm getting going on my CaRX after a year or so gathering dust beneath my work space.
Reactor: MTC Procal
Masterflex: 7550-30 | 40mL/min
CO2: aquariumplants.com bubble counter | 12psi at 4 seconds/bubble
pH monitored by APEX in line via the feed to the effluent chamber
I wanted to monitor how the pH varies in the reactor prior to starting to make sure my setup is in order.
I've set the bubble counter to cycle at a pH of 7.3. With that setting, pH swings from 7.31 down to 7.13.
This pH swing seems rather large. Should I be making adjustments to tighten this range? I'm considering starting at 6.9 but I do have zeomag loaded also. Just want to make sure I don't make mush before I get things going in earnest.
Thx in advance for the assist!!
|