View Single Post
Unread 05/06/2012, 06:52 PM   #9
Euler Kernighan
The "DIY Guy"
 
Euler Kernighan's Avatar
 
Join Date: Sep 2010
Posts: 453
Quote:
Originally Posted by kruserm View Post
I would be interested in a group buy and working together once we get all the details figured out. I am hoping to order the controller parts in the next couple of weeks and getting that built then moving on to the leds. I wasn’t clear if you were using a controller or building your own, what are you doing?

I'd like to build my own controller (hope be able to do that ).



Quote:
Originally Posted by kruserm View Post
At the bottom of this post http://www.reefcentral.com/forums/sh...postcount=2193 is a link to the BOM and board design. I was getting ready to order some boards some seedstudio, you have to buy in quantities of 10. But wanted to get controller done first. I am planning on 8 different colors (white, RB 450nm, RB 465nm, blue, green, red, red/orange, UV) with each being dimmable so I will be using 8 boards and may use the other 2 boards for the sump and put some frags in the sump.

ok, so I'm following you on that and we're taking the terahz's LM3409HV route.

step by step:

1) access that link (http://www.reefcentral.com/forums/sh...postcount=2193) to the last revision of the LM3409HV based driver

2) overthere get into the link to the project files where you'll find the following files:
LICENSE.tx - no comments
LM3409.v06.brd - board layout
LM3409.v06.brd.png - just a board illustration
LM3409.v06.jpg - board photo (end product)
LM3409.v06.sch - board design
LM3409.v06.sch.png - schematics illustration
Parts.List.ods - BOM file (component list)
Parts.List.xls - BOM file (component list - same as previous but in .xls)

3) inside de BOM file ( Parts.List.xls ) there is a link to the Mouser Eletronics website where it's possible to get a quotation on (and buy) all components needed by the LM3409HV driver board

4) Save all files in a common place inside your home directory [ directory where LM3409.v06.brd is ]

5) the board itself can be ordered on a PCB prototyping service - http://www.iteadstudio.com , http://www.seeedstudio.com - 10 boards at minimum at the price of USD 10 ($1 each)


__________________
Euler
NON DVCOR DVCO
Euler Kernighan is offline   Reply With Quote