Quote:
Originally Posted by nemmy
One baffle will regulate water level. Over under are just to weed out microbubbles.
Mine was socks and skimmer, one over baffle, fuge, over under over baffles, return pump.
I had the dumb idea to use thin acrylic hooked to glass. Acrylic buckled, silicone held, glass tank gave way. Fun stuff haha.
Don't know how I ended up on this thread but I did.
|
After a bit of research, this is exactly as I have it planned. Thanks anyways.
After finally starting to feel better from the flu(haven't worked all week), I got some progress going. I completely sanded the inside of the stand(3 coats of primer came off pretty quickly with 60 grit), and got the first coat of appliance epoxy paint on. That's about all I've done beside order in some more odds and ends, and head down to the local glass shop and get baffles cut. Tomorrow I plan on a second coat and possibly a third, get my baffles installed, and maybe start working on bracing my floors.