[slief]

Originally Posted by vhuang168

Wanted to check to make sure these are the correct items before I order them.

I have a RD3 80w return, a Double Cone 200/RD3 skimmer.

This is the correct part for the skimmer?

http://royalexclusiv.net/Accessories...l-h::1481.html

And this is for the return?

http://royalexclusiv.net/Accessories...0mm::1483.html

http://royalexclusiv.net/Accessories...0-0m::464.html

My sump has 3/4" bulkheads so I'm going to have to find a way to adapt the outpur from the silicon hose from 1.25" (32mm) to 3/4".

Thanks
Vincent

The first two are the correct slot pipes but the silicone hose would be for the output on the RD3 80 and not the input. That said, since the pump has 1" fitting on it for US pumps, you can just use a 1" bushing to 3/4" threaded fitting and then get a 3/4" barbed fitting and some 3/4" vinyl tubing. You will be restricting your flow a bit by reducing it but if that's all you have and you can't drill your sump, then you are stuck.

I wish we had these slot pipes in US stock but unfortunately we don't at the moment. Until we get some, they have to be ordered from Germany.