Quote:
Originally Posted by mike810
Well, it was an F3 code. I pulled the nozzle and didn't see any salt creep on the nozzle. I checked the impeller but didn't see anything out of the normal. Some slime build up but I don't think that would be enough to cause resistance would it? I've been dealing with dinos, I'm sure some of the strands made it's way into the pump. Could that cause an F3 error? The skimmer literally shuts off for a second, throws a code and then turns right back on.
|
I doubt that Dino's would cause that. I would take it apart just to be safe, pull the impeller, give it a quick 5-10 minute soak in white vinegar, scrub it well inside and out, rinse it and put it back together. Then see if it persists. Hopefully it's just something stupid and a good cleaning will solve it. I have one other thing I want you to check at the same time. I sent you a PM. We will get it figured out.
__________________
Director Customer Support Royal Exclusiv USA
For All Royal Exclusiv & Bubble King questions please refer to our Sponsor forum: http://www.reefcentral.com/forums/fo...play.php?f=745
Current Tank Info: 480G display mixed reef, 90G sump, 90G refugium, 60G display refugium. Check out my build thread: http://www.reefcentral.com/forums/showthread.php?t=1783476
Last edited by slief; 09/28/2017 at 10:50 PM.
|