Reef Central Online Community - View Single Post

DeepSeaBeauti · 12/06/2021, 02:16 PM

Does anyone here have these or are familiar with them? I want to use my own power supply for two reasons. 1 the PSU are 4 week back ordered, and 2 the largest one is 300W and I need over 400W. They use a 3 pin round connector and from what I can see online the PSU says pin 3 is un-used. But in the fixture it shows signal. I need to know if there is a jumper in the connector or if it is just positive to pin 1 and ground to pin 2 leaving pin 3 empty. I do not want to damage these as I waiting nearly 3 months for them to arrive!

Will

12/06/2021, 02:16 PM	#1
DeepSeaBeauti Will Fielitz Join Date: Jul 2010 Location: Patchogue , long Island Posts: 1,151	Lightbar 2 PSU Does anyone here have these or are familiar with them? I want to use my own power supply for two reasons. 1 the PSU are 4 week back ordered, and 2 the largest one is 300W and I need over 400W. They use a 3 pin round connector and from what I can see online the PSU says pin 3 is un-used. But in the fixture it shows signal. I need to know if there is a jumper in the connector or if it is just positive to pin 1 and ground to pin 2 leaving pin 3 empty. I do not want to damage these as I waiting nearly 3 months for them to arrive! Will __________________ I can never figure out why my wallet is empty. But my tank sure is awsome looking. Current Tank Info: 300G DD reef tank, 100g sump 40g breeder set up as a refugium, C-skim skimmer, , 2 165w LED and t5 setup, BRS reactor for carbon and GFO. Fish: lawnmower blenny, 12clowns, Watchmen golby, FoxFace, Yellow angle, 6line wrase.