View Single Post
Unread 01/07/2008, 11:10 AM   #6
djfrankie
Moved On
 
djfrankie's Avatar
 
Join Date: Oct 2000
Location: Miami, South Florida
Posts: 1,321
Now to the cap.

Cut a piece of acrylic slightly larger than the top flange. Drill two 1/4" screws using the flange as your template.

Photobucket


Route it out and drill the remaining screws. Now tap the top lid. This will be you degassing output.

Photobucket

Trap your gasket material between your flange and lid and cut it out using a sharp utility knife.

Photobucket

Now glue your top flange.

Add your fitting making sure you use teflon on them to prevent leaks.

Here's what the finished product should look like.

Photobucket
Photobucket

Hope this makes sense and enjoy the hobby!

djfrankie


djfrankie is offline