Ok here are some more pictures:
Modification of the reduction fitting
1. On the left, you can see that I cut the fitting in half so that I have the bottom half that is the water intake section and the top half that will go into the top of the 2" coupling fitting.
2. The middle is the picture of how I cut out portions of the rim of the lower half of the reduction fitting so that the water intake is as unrestricted as possible.
3. Right side is the pict of the 2" to 1" reduction fitting as received from Lowes or HD.
I tried to get some perspective in the pictures. Hopefully the point will get through.
|