Reef Central Online Community - View Single Post

Breadman03 · 02/05/2018, 07:31 AM

I recently set up the TLF KW300 using my Neptune DOS to drive it. It's too early to really give much feedback, but setting the DOS to run at 250ml/minute seems to spin the spray head which spins at the bottom of the reactor to mix the solution properly. I have it coded to dispense 100ml every 3 hours at the moment and am testing every other day to adjust my dosing. I'm going to try reducing the feed rate and see if it still functions properly.

Why am I using it? I bought it maybe 4-5 years ago and it's been sitting on the shelf ever since. It was logical to use it with the pumps I have before buying something else. If I was buying new, I would probably go with the Avast kalk stirrer so that I wouln't have to worry about mixing the slurry with my feed water.

02/05/2018, 07:31 AM	#2
Breadman03 New Old School Join Date: Feb 2012 Location: Luzerne County, PA Posts: 3,293	I recently set up the TLF KW300 using my Neptune DOS to drive it. It's too early to really give much feedback, but setting the DOS to run at 250ml/minute seems to spin the spray head which spins at the bottom of the reactor to mix the solution properly. I have it coded to dispense 100ml every 3 hours at the moment and am testing every other day to adjust my dosing. I'm going to try reducing the feed rate and see if it still functions properly. Why am I using it? I bought it maybe 4-5 years ago and it's been sitting on the shelf ever since. It was logical to use it with the pumps I have before buying something else. If I was buying new, I would probably go with the Avast kalk stirrer so that I wouln't have to worry about mixing the slurry with my feed water.