Quote:
Originally Posted by rogermccray
You can build a frame into the wall, and hang them from that, only need a few 2x4s.
|
Thanks for the idea... but I am now trying to figure out how I can make the entire light fixture/assembly move up and down... it will definitely help me with the cleaning...
Quote:
Originally Posted by PAnanoguy
what I would do is build a plywood shelf at the height you want (about 14") then cut out the four rectangular holes in the shelf for the radiions to sit in. 11.25" x 6.5" holes then use a 1/4" shoulder bit on a router to give you the correct final hole and set them into to that. IMO would be a cleaner look as well.
|
Thanks for the suggestion... I'm going to look into making a light aluminum frame for all for lights so I can hang it and have it able to move up and down...