Quote:
Originally Posted by mike810
Do you guys think it is safe to attach a vinyl tubing directly to one of the red pipes in the back of the dream box and ratchet clamp it? I already ordered unions and barbed fitting but would rather not glue unions to the dreambox if you guys think it's safe going the other route. The tubing till probably have 250-500 gph running thru it, it will be used to feed an ARID C30 reactor.
|
Absolutely. Vinyl or silicone tuning is perfectly fine. That is what those fittings are there for. If you use vinyl, use some hot water to stretch the tubing over the pipe and some plastic hose clamps. If you ever need to remove the tubing, just use some heat on the tubing to make it pliable for removal.
__________________
Director Customer Support Royal Exclusiv USA
For All Royal Exclusiv & Bubble King questions please refer to our Sponsor forum:
http://www.reefcentral.com/forums/fo...play.php?f=745
Current Tank Info: 480G display mixed reef, 90G sump, 90G refugium, 60G display refugium. Check out my build thread: http://www.reefcentral.com/forums/showthread.php?t=1783476