Quote:
Originally Posted by rvitko
What I mean is the top off hose should be routed several inches from where the sensor is. The splash of incoming water adds bubbles.
The valid test for bubbles is leave the sensor exactly where it is and just swipe your finger across it. The sensor only detects air vs water, a few clinging bubbles can be interpreted as dry.
|
Quote:
Originally Posted by rvitko
It should stop within 5 seconds of wiping your finger under the sensor if it is bubbles.
|
the fill hose is in a different sump section, where the overflow enters, and the skimmer sits there as well.
the sensor is in the final sump section, where the return pump is.
i'll try the wipe test, and let you know what happens.
J.