View Single Post
Old 11/12/2017, 03:05 PM   #3
Registered Member
teo241's Avatar
Join Date: Feb 2003
Location: wisconsin
Posts: 344
By manual I mean have the mode set to "continuous" and I have been pressing the yellow button to have the system change 8 gallons. I haven't set it to 'week' or 'day' yet -- because of this issue. I have a photo of the controller if you need which just shows all of the LEDs lit when it is 'frozen'.

Also, of note -- when I first started the system one of the metering reservoirs would not drain -- the solenoid that opens the drain valve wouldn't click open. No amount of resetting/cancelling did anything.

I ended up taking the back off of the metering reservoir and found one of the wires was not on the connector - once I reconnected it it has worked without any issue.

360, 75, 45
teo241 is offline   Reply With Quote