View Single Post
Unread 01/11/2007, 06:42 PM   #2
KingfishJohn
Registered Member
 
Join Date: Jul 2004
Location: Austin, TX
Posts: 474
Tank:

Manufactured by Acrylic and Glass Exhibits out of Dallas, Texas.
www.acrylicandglassexhibits.com

96"L x 36"W x 30"H

The tank will just into the waiting room as a divider and will be viewable from three side. The fourth side has an external weir type overflow and will back into a small tank room. The tank's bottom is constructed out of Sch. 80 PVC.

Stand:

Custom steel stand and cabinetry.

Circulation:

Return - Sequence Dart (3600 gph)

This pump will be cranked down to probably 2000 gph but Sequence pumps can be ramped down and consume less electricity.

Closed Loop - Sequence Hammerhead (5800 gph)

Wavemaker - Tunze Wavebox and Extension

Sump:

Custom 150-180 gallon acrylic sump/fuge.

Support Equipment:

Skimmer - Deltec AP902

Kalk Reactor - Deltec KM500

Calcium Reactor - Deltec PF601 (with Rowalith C+)

Rowaphos Reactor - Deltec FR509

Auto topoff - Tunze Osmolator 3155

Controller - Reefkeeper 2 (w/ expansion socket and PH probe)

RO/DI unit - Aqua FX Mako

On site saltwater mixing reservoir for waterchanges.

Lighting

(3) 400w Coralvue Reeflux 10k bulbs on Coralvue Ballasts

(4) 72" URI True Actinic VHO's on Icecap 660's

Pictures of the tank as the silicon cures should be up soon, followed by pictures of the space and eventually installation.

Thanks for looking!

John


KingfishJohn is offline   Reply With Quote