View Single Post
Unread 01/07/2008, 12:11 PM   #8
djfrankie
Moved On
 
djfrankie's Avatar
 
Join Date: Oct 2000
Location: Miami, South Florida
Posts: 1,321
To degass the unit. There's quite a bit of sulfate (end product) built up while cycling the unit.

All the gases accumulate on the highest point on the reactor.

I ran the effluent hose through the top to see if I wouldn't have to degass it anymore, but it didn't work. The effluent would get clogged up really quick. This way is just a quick 5 second degassing and you don't have to fiddle with the effluent rate every time.

HTH,
djfrankie


djfrankie is offline