View Single Post
Unread 02/16/2019, 11:23 AM   #8
slief
RC Sponsor

 
slief's Avatar
 
Join Date: Sep 2009
Posts: 14,173
Quote:
Originally Posted by Zalick View Post
Interesting. I just pushed the DIN connectors in harder and things seem to be working, at least with the duskdawn profile. The Stream 3s do have a minimum. At 0, and 3 second intervals, they do not turn off but rather they go down to maybe 20%. It takes them 10 seconds to turn off.
They are also 6.5v so 65 and 100 yield the same 100% power.

I tested 3 second intervals and 30 second intervals with the duskdawn profile and they are working.

Can't believe I've spent hours on this and just pushing them in much harder than I expected (or normally would think is the hardest to push), seems to have solved it.

Thanks for the help as usual! From my a360s to my LX7s and my pump profiles, my tank tank is like a progeny of yours!
Great to hear and very glad to help! I know those din cables can be a bit fussy. Been there done that. Usually pushing the sleeve back a bit and pushing them in hand enough does the trick. Glad you get them working!


__________________
Director Customer Support Royal Exclusiv USA
For All Royal Exclusiv & Bubble King questions please refer to our Sponsor forum: http://www.reefcentral.com/forums/fo...play.php?f=745

Current Tank Info: 480G display mixed reef, 90G sump, 90G refugium, 60G display refugium. Check out my build thread: http://www.reefcentral.com/forums/showthread.php?t=1783476
slief is offline   Reply With Quote