Quote:
Originally Posted by machodik
I am referring to the silicone tube was attached to the red wedge pipe which is restricting me to rotate the wedge pipe fully.
The silicone tube that comes out on the certain point of the red wedge pipe and connect to the pump. That is the one in my questions ( not the clear tube connecting the base of the pump to the base of the skimmer.)
|
Your wedge is wide open and the tube is just long enough for it to be wide open. If you need to close the wedge pipe, rotate it counter clockwise. That will add slack. You can also double check to see if you rotate the wedge pipe 180* counter clockwise as I think that will also leave the wedge fully open. I haven't looked inside the wedge pipe of the Double Cones to see how they are cut.
__________________
Director Customer Support Royal Exclusiv USA
For All Royal Exclusiv & Bubble King questions please refer to our Sponsor forum: http://www.reefcentral.com/forums/fo...play.php?f=745
Current Tank Info: 480G display mixed reef, 90G sump, 90G refugium, 60G display refugium. Check out my build thread: http://www.reefcentral.com/forums/showthread.php?t=1783476
Last edited by slief; 01/09/2016 at 09:09 PM.
|