Quote:
Originally Posted by Dugless
I’m having some strange behavior after the LED lights are scheduled to turn off. Roughly 30 seconds after they shut off, the LEDs flash a soft purple for a split second. Any thoughts why it is doing this?
|
The LED clusters are overheating:
- The fixture is inside a canopy with inadequate ventilation
- The fans are defective (due to excessive salt, or from being inside a canopy)
- The settings are incorrect: Youtube link here.
You can check the temperature of the LED cluster on the control box for most generations of the fixture, or in the user interface for the WiFi Powermodule. More than likely its around 60 degrees C which is why it is shutting off.
hope this helps!