Okay so I just setup my calrx.
I’m running 30 ml/min and 30bpm. My ph is stable at 6.69. 15psi on 5 lb tank.
Geo6x12
5lb tank
Ap Carbon doser
L/s 17 tubing on cole parmer pump.
Reborn media and zeomag
Apex controller with ph probe calibrated.
I’ve read to shoot for a 6.5ph inside the chamber. I can only get to 6.69 and my tank is at the max at 15psi. I am new to calcium reactors. Is 15psi too high? Any recommendations?
I’m in the first couple hours so still unclear if I need to bump up or down ML/MIN
Sent from my iPhone using Tapatalk
|