Quote:
Originally Posted by balz3352
Can we sticky or make a new thread on how to actually set up and fine tune.
How to increase/decrease alk in tank depending on the situation.
What increasing/decreasing the effluent will do.
What increasing/decreasing ph will do.
All in relation to the tank.
Best place to start for a new reactor and how to adjust from there.
I know the answers are here but hard to find in a 2800 post thread.
Thanks guys!
|
It is in the first few posts. I can update the tuning post to be more clear but I would prefer to keep all posts regarding this setup in this thread. Yes, it is long, but starting a new thread would require a lot of explaining. If you have any questions or comments on how you would like to see the tuning post adjusted let me know, and I will see if I can incorporate it.
The first few posts in this thread tell you what you need to know. Every tank will be the same, tank has x demand, you adjust gas and effluent until demand is met. The reactor setups can vary brand to brand but the actual tuning is the same. That is what is brilliant about the setup, very easy to dial in, and very precise/predictable.