Quote:
Originally posted by BeanAnimal
If you are concerned about the siphon starting, then you can place the open channel standpipe bulkhead slightly higher (1/2" or so) than the siphon standpipe bulkhead.
|
The bulkheads are already in place. Would changing the depth of the elbow in the overflow help, or should I just go with it and see what happens?
Quote:
LoneRanger, the small drilled holes go in the siphon channel pipe just above the water level in the sump. The holes help vent the air from the siphon channel so that channel starts up like it should. It made all the difference in my system.
|
Should I try this or wait and see?