Reef Central Online Community - View Single Post - drummereef's 180g in-wall build

drummereef · 04/28/2012, 12:54 AM

Next step includes threading the Plastic Screw through the Magnet and install the Washer. Here you can see how the back side of the magnet is counter-sunk to accommodate the taper on screw.

Next, slide the Wet Side Frame over the magnet assembly.

Install the Propeller over the Plastic Screw and hand tighten the Plastic Nut.

Finally, replace the Nozzle and Wet Side Cover and VOILA - A happy Vortech!!

04/28/2012, 12:54 AM	#3732
drummereef Team RC Member Join Date: Jul 2006 Location: STL Posts: 14,754	Next step includes threading the Plastic Screw through the Magnet and install the Washer. Here you can see how the back side of the magnet is counter-sunk to accommodate the taper on screw. Next, slide the Wet Side Frame over the magnet assembly. Install the Propeller over the Plastic Screw and hand tighten the Plastic Nut. Finally, replace the Nozzle and Wet Side Cover and VOILA - A happy Vortech!! __________________ -Brett 180g Marineland Starfire In-Wall 278 gallon system Last edited by Misled; 04/08/2018 at 08:50 PM.