Reef Central Online Community - View Single Post - Alex's 8x3x2' Australian Reef Build (340gal)

Peckoltia · 10/02/2018, 07:40 PM

Found some composite shims locally! I shimmed the 3 legs that were furthers off the ground. Now 9/10 legs touch the ground and the tank 4mm (5/32") off over the length of the tank.

I can't see how I can get this anymore level than this. The tank sits on a sheet of extra thick foam and a sheet of marine ply that has been painted with weather shield paint for added durability.

RODI line is in the tank, should be filled within the next few days.

10/02/2018, 07:40 PM	#40
Peckoltia Registered Member Join Date: Oct 2004 Location: Perth, Australia Posts: 60	Found some composite shims locally! I shimmed the 3 legs that were furthers off the ground. Now 9/10 legs touch the ground and the tank 4mm (5/32") off over the length of the tank. I can't see how I can get this anymore level than this. The tank sits on a sheet of extra thick foam and a sheet of marine ply that has been painted with weather shield paint for added durability. RODI line is in the tank, should be filled within the next few days.