Quote:
Originally Posted by africangrey
Thank you very much for your feedback, I might not pursuit this setup if its not brushless, to have a constant grinding noise right next to me 24/7 isn't very pleasant. So brush part is on the driver not the pump, I've always thought it is another way around.
|
The brushed part is on the pump motor, not the pump head which screws onto the motor. If you look at the back end of the motor along the side, there are two little black caps (one on either side) and the brushes reside below those caps. Comparatively, if you look at the pump shown above, there are no black caps on either side towards the rear of the motor because that unit is brushless.
__________________
Director Customer Support Royal Exclusiv USA
For All Royal Exclusiv & Bubble King questions please refer to our Sponsor forum:
http://www.reefcentral.com/forums/fo...play.php?f=745
Current Tank Info: 480G display mixed reef, 90G sump, 90G refugium, 60G display refugium. Check out my build thread: http://www.reefcentral.com/forums/showthread.php?t=1783476