Reef Central Online Community - View Single Post - Official: Masterflex Calcium Reactor Setup Thread

tkeracer619 · 01/14/2014, 12:12 AM

This is my current setup. Its a MRC CR2 Dual With a mag3, Masterflex 77301-20, and an original AP Electronic Regulator. I use ARM standard media and buy it in the 50lb bags. If you shop around you can find a great deal on it. I feel it works better in most reactors then the coarse stuff. I haven't re-installed this since the crash but its time is coming. It has to wait until a little scuba trip is over

Lets see some current setups and results! I know they are out there, now lets see them.

If you have questions this is the place to ask!

01/14/2014, 12:12 AM	#5
tkeracer619 Registered Member Join Date: Jan 2006 Location: Westminster, CO Posts: 17,289	This is my current setup. Its a MRC CR2 Dual With a mag3, Masterflex 77301-20, and an original AP Electronic Regulator. I use ARM standard media and buy it in the 50lb bags. If you shop around you can find a great deal on it. I feel it works better in most reactors then the coarse stuff. I haven't re-installed this since the crash but its time is coming. It has to wait until a little scuba trip is over Lets see some current setups and results! I know they are out there, now lets see them. If you have questions this is the place to ask! __________________ Hobby Experience: 9200ish gallons, 26 skimmers, and a handful of Kent Scrapers. Current Tank: Vortech Powered 600G SPS Tank w/ 100gal frag tank & 100g Sump. RK2-RK10 Skimmer. ReefAngel. Radium 20k. Last edited by tkeracer619; 01/14/2014 at 12:26 AM.