Quote:
Originally Posted by Haksar
Thanks will switch ends and see and also increase the BPM. since it's at 1 bubble per second will increase a little higher but the bubble count in the reactor is not consistent based on the AP regulator light.Thanks for all your assistance.
|
Hi Haksar: I think that if you have a pH controller you don't need to play around with the bubble count, just decrease the settings in the controller. For example, set it up at 6.5-6.7, instead of 6.6-6.8, and see what happens with the alkalinity in the tank. Mine is now set at 6.6-6.8, like yours, but I also have a kalkwasser reactor.
Good luck