Quote:
Originally Posted by EcoTech Service
Here's my graph and instructions on how to import it! 
1. Visit the following page to download Jon’s Radion Graph:
http://software.ecotechmarine.com/JonsRadionGraph.zip
2. Once the download has finished, save the .etg file to your desktop.
3. Open up the EcoSmart software, and adjust your Start Day/Start Night times in Artificial Mode to 10:00am/11:00pm.
4. Apply the .etg file to your graph by selecting the down arrow button that says “Import to Selected Schedule”.
5. The graph will then be applied to your existing project, where you can now program the group(s) and save the project for future reference.
|
Hi Jon,
I just received and set up my Radion today and love it! I downloaded and programmed the unit with your program as described above.
In looking at the program, it shows that by 12am all of the lights should be off (0% with 0% intensity). I made sure that my Radion is in Artificial mode with the blue LED on the top lit up as well. However, as I type this shortly after 1am, there are still blue LED's on (very dim) and I do not know why?
I tried plugging the Radion in to the computer and re-loading the program. All of the LEDs turned off for about 3 minutes and then the blue ones turned back on again (very dim). Am I missing something in your program or is there something wrong here. I look forward to any advice or suggestions that you have!