|
What mode is the 7095 in? In Interval 2 one pump will only idle until the interval change over.
The PC version of 7096 got an update which added an Interval 2 mode referred to as Interval with idle speed, without this the mac version of 7096 has only an Interval 1 like mode where the other pump is off. It also does not have ramp which is a feature designed to ease start up so there is less noise on start up, with Stream 3 this is a non issue as off and on speeds are not recommended since the start up takes time and the pump will not work properly and there is no click on start anyway.
To only connect two pumps you use 7092.300, it is just a straight cable. The Y cable is for connecting 3 pumps or 2 pumps and a 7097.050 photocell/moonlight.
Regarding 7095 repair, I cannot repair more major issues than just the moonlight or a stuck button, a larger issue will point to more extensive circuit damage.
__________________
Roger Vitko
Tunze USA
"He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!"
Current Tank Info: 210 gallon planted tank with Altum Angelfish
|