Next strip the cat5e cable and measure to ensure the gray sheilding will still be witihn the completed mini-din.
Then color code can be your choice. An industry standard for telecom is;
blue, bl/w, green, g/w, orange, o/w, brown, br/w.
As the Apex only uses 7 pins I cut the brown/white wire off. Then strip an ever so small amount of the shielding from each wire.
2011-01-05 21.18.50.jpg
Your ready to solder, just be careful not to leave and solder buggers on the pins as they may short out once assembeled in the slug.
2011-01-05 21.23.43.jpg