Why are you running 100ml/min through your reactor?
I think we need to start at the beginning.
Please remove and re-install all fittings and tubing with proper clamps and teflon paste (everything). I have seen this over and over and more than half the time it is due to an air leak. Please address this before continuing any more steps.
After completing the last step set your peristaltic pump at 30ml/min.
Adjust your regulator until you get a ph of 6.5. Do not use the controller to set the ph, use the regulator.
__________________
Hobby Experience: 9200ish gallons, 26 skimmers, and a handful of Kent Scrapers.
Current Tank:
Vortech Powered 600G SPS Tank w/ 100gal frag tank & 100g Sump. RK2-RK10 Skimmer. ReefAngel. Radium 20k.
|