Reef Central Online Community - View Single Post - ACIII Programming

reefknight · 05/05/2011, 12:53 PM

I'm setting up my ACIII again and have added an AquaSurf to it and am using many more functions on it than I have in the past. Can someone,please, proof read my code and make sure that I'm not setting myself up for a possible disaster. I've scanned the "Best Practices and ACIII Post Program" threads and have come up with the following. I've attempted to use Ken's simulator but everytime I use it wants to close the program.

Thank you!

Timers
ACT$-A01 = ATI Powermodule (54w x 2)
FAN%-A02 = Sump Fan 9”
FUG$-A03 = Refugium Light (65k CFL)
SKM#-A04 = KZ Revolution Sm – Aquabee 2000/1
T5L$-A05 = ATI Powermodule (54w x 8)
DOS#-A06 = Profilux Stand alone 3CH Doser
HTR%-A07 = Ehiem Jager 250w
RTN#-A08 = ATB Flowstar 1500
ALM&-A09 = Alarm
VPH$-I01 = AquaSurf
TZ1#-E1 = Tunze Nanostream 6055
TZ2#-E2 = Tunze Nanostream 6055

Defaults

If Time > 00:00 Then ALM OFF
If Time > 00:00 Then RTN OFF
If Time > 00:00 Then SKM OFF
If Time > 00:00 Then DOS ON

Lighting

If Time > 08:30 Then ACT ON
If Time > 20:30 Then ACT OFF
If Time > 10:30 Then T5L ON
If Time > 18:30 Then T5L OFF
If Time > 21:30 Then FUG ON
If Time > 07:30 Then FUGOFF

Dosing

If pH > 08.40 Then DOS OFF

Feed Timers

If FeedA 000 Then RTN OFF
If FeedA 000 Then SKM OFF

Temp Control

If Temp < 78.2 Then HTR ON
If Temp > 78.8 Then HTR OFF
If Temp > 79.5 Then FAN ON
If Temp < 79.0 Then FAN OFF
If Temp > 82.0 Then T5L OFF
Max Change 060 M Then T5L OFF
If Temp > 83.0 Then ACT OFF
Max Change 060 M Then ACT OFF

Alarms

If Temp < 77.5 Then ALM ON
If Temp > 82.0 Then ALM ON
If pH < 07.40 Then ALM ON
If pH > 08.40 Then ALM ON

Power Failures

If Power 000 Then ALM ON
If Power 010 Then FAN OFF
If Power 005 Then HTR OFF

Powerheads

If Time > 05:00 Then VPH OFF
If Time > 23:00 Then VPH ON
If Timer VPH = ON Then PH1 PF1
If Timer VPH = OFF Then PH1 PF1
If Timer VPH = ON Then PH2 PF1
If Timer VPH = OFF Then PH2 PF1
Pmp MODE sd for PF1
Pmp Int 040/080 for PF1
Pmp OSC 20/60/00 for PF1
Pmp MODE Sd for PF2
Pmp Int 080/000 for PF2
Pmp OSC 90/90/00 for PF2

If FeedA 000 Then PH1 OFF
If FeedA 000 Then PH2 OFF

05/05/2011, 12:53 PM	#1
reefknight Registered Member Join Date: Jan 2006 Location: Warner Robins, GA Posts: 626	ACIII Programming - Can someone proof this I'm setting up my ACIII again and have added an AquaSurf to it and am using many more functions on it than I have in the past. Can someone,please, proof read my code and make sure that I'm not setting myself up for a possible disaster. I've scanned the "Best Practices and ACIII Post Program" threads and have come up with the following. I've attempted to use Ken's simulator but everytime I use it wants to close the program. Thank you! Timers ACT$-A01 = ATI Powermodule (54w x 2) FAN%-A02 = Sump Fan 9” FUG$-A03 = Refugium Light (65k CFL) SKM#-A04 = KZ Revolution Sm – Aquabee 2000/1 T5L$-A05 = ATI Powermodule (54w x 8) DOS#-A06 = Profilux Stand alone 3CH Doser HTR%-A07 = Ehiem Jager 250w RTN#-A08 = ATB Flowstar 1500 ALM&-A09 = Alarm VPH$-I01 = AquaSurf TZ1#-E1 = Tunze Nanostream 6055 TZ2#-E2 = Tunze Nanostream 6055 Defaults If Time > 00:00 Then ALM OFF If Time > 00:00 Then RTN OFF If Time > 00:00 Then SKM OFF If Time > 00:00 Then DOS ON Lighting If Time > 08:30 Then ACT ON If Time > 20:30 Then ACT OFF If Time > 10:30 Then T5L ON If Time > 18:30 Then T5L OFF If Time > 21:30 Then FUG ON If Time > 07:30 Then FUGOFF Dosing If pH > 08.40 Then DOS OFF Feed Timers If FeedA 000 Then RTN OFF If FeedA 000 Then SKM OFF Temp Control If Temp < 78.2 Then HTR ON If Temp > 78.8 Then HTR OFF If Temp > 79.5 Then FAN ON If Temp < 79.0 Then FAN OFF If Temp > 82.0 Then T5L OFF Max Change 060 M Then T5L OFF If Temp > 83.0 Then ACT OFF Max Change 060 M Then ACT OFF Alarms If Temp < 77.5 Then ALM ON If Temp > 82.0 Then ALM ON If pH < 07.40 Then ALM ON If pH > 08.40 Then ALM ON Power Failures If Power 000 Then ALM ON If Power 010 Then FAN OFF If Power 005 Then HTR OFF Powerheads If Time > 05:00 Then VPH OFF If Time > 23:00 Then VPH ON If Timer VPH = ON Then PH1 PF1 If Timer VPH = OFF Then PH1 PF1 If Timer VPH = ON Then PH2 PF1 If Timer VPH = OFF Then PH2 PF1 Pmp MODE sd for PF1 Pmp Int 040/080 for PF1 Pmp OSC 20/60/00 for PF1 Pmp MODE Sd for PF2 Pmp Int 080/000 for PF2 Pmp OSC 90/90/00 for PF2 If FeedA 000 Then PH1 OFF If FeedA 000 Then PH2 OFF __________________ Bill Current Tank Info: DSA Neo 185gal - Coming Soon!