Reef Central Online Community - View Single Post

Thinslis · 08/05/2007, 10:15 AM

Famous, looks like we are both heading down the same path =). Yes so far I have got just about all the silicone off the glass around the holes. I think I am going to have an issue with the bulkheads, if ou look at the pictures you'll see they drilled 2 of the holes very close to the edge.

It is a 4 foot tank. I plan to use my 36 inch 2x250w MH light to get the tank started, then replace it with something yet to be determined down the road. I'm leaning tward sticking with something MH, maybe mix in 4 T5s or something to come on before the MH.

08/05/2007, 10:15 AM	#4
Thinslis Registered Member Join Date: Dec 2006 Location: Madison, Ohio Posts: 1,658	Famous, looks like we are both heading down the same path =). Yes so far I have got just about all the silicone off the glass around the holes. I think I am going to have an issue with the bulkheads, if ou look at the pictures you'll see they drilled 2 of the holes very close to the edge. It is a 4 foot tank. I plan to use my 36 inch 2x250w MH light to get the tank started, then replace it with something yet to be determined down the road. I'm leaning tward sticking with something MH, maybe mix in 4 T5s or something to come on before the MH. __________________ -B Current Tank Info: 40g breeder, ER-RS80, MP40w, 250w + 2xT5