Quote:
Originally Posted by tkeracer619
Need to take your time here. Slowly increase gas flow until your tank demand stabilizes. Ph in the reactor is just a ballpark of where you should be, not where you neccesarily will be. Test your tank frequently to make sure your not overdosing it. That reactor pushing 30ml/min at 6.5 with reborn is probably pushing quite a bit of alk/cal
|
Starting to figure that out, slowly adjusting and bring ml/min and bpm down. It was pushing quite a bit. But I’ve been testing and adjusting. Thanks for the reply
Sent from my iPhone using Tapatalk